1. Front Head Stand:
(C/MFHS)

• Designed to aid with easy maintenance of your bike, this front end stand locates in the steering head hole and gives the ability to drop the forks out of your bike. Should be used in conjunction with a rear stand to give added stability.
• Supplied with sleeve kit for different sized steering heads

2. Front Fork Stand:
(C/MFF)

• This front stand locates under the bottom of the forks and is adjustable to compensate for unequal length fork legs (gently flex apart or together to adjust fork width). Should be used in conjunction with a rear stand to give it added stability.
• Suitable for use on C/MBW "Work Bench".

3. Single Sided Stand:
(C/MSS)

• A sturdy sided stand, it offers a removable or "slide through" handle for added stability and has a "TUNNEL" shaped footprint to reduce rocking. Twin bearing pin with tap-fit sleeve for HONDA, TRIUMPH, or DUCATI (please state) or fits bikes with swing arm located on the right side, such as RS125, RS250 etc.
• Suitable for use on C/MBW "Work Bench".

4. Work Bench & Ramp:
(Work Bench C/MW) (Ramp C/MWBR)

• An excellent addition to any workshop this bench will allow easy access to all areas of your bike. At 2500mm long and 625mm wide, the bench top is large enough to mount a bike in front and rear stands. It is 600mm high and folds flat for space saving storage. There is a locating bracket on both ends for the ramp (C/MWBR). Weight is 38kg. (Shown with CLAM rear stand C/MCLAM). The aluminium ramp (sold separatel) locks into place on the work bench (C/MWB). It is 2000mm long, will take tyre widths up to 230mm and bikes with a weight of up to 250kg

5. Accessories:

• A variety of accessories for the Champion CLAM stand are available to ensure the correct fit on most bikes; rubberised cups, forks, spring loaded tulips and bobbins that fit directly into pre-located holes in swingarm to locate rear stands when using tulip or fork fittings.

6. Clam Stand:
(C/MCLAM)

• This unique, versatile rear stand is collapsible for ease of storage / transportation. Its innovative design allows for an adjustable lift height and lockable fork spacing. The handle is conveniently placed to one side for clearance of the numberplate. Additional support is given when the handle is slid through. With a removable handle, the stand does not protrude past rear of bike and its "TUNNEL" shaped footprint reduces rocking. Will take tulips or cups as an alternative to forks and will take front adaptor.
• Suitable for use on C/MBW "Work Bench"

7 and 8. CLAM Stand in Use:

• The CLAM stand offers ease of use and convenience. Used with the extended handle it has added leverage for simple operation and once in place this handle slides through to give greater stability. This NEW design is unique to CHAMPION, combining convenience and great support.